Metal Cable Gland (Metric/Pg/Npt/G ulusi)
Metal Cable Gland (Metric/Pg/Npt/G ulusi)
Mawu Oyamba
Zingwe zamagetsi zimagwiritsidwa ntchito kwambiri kukakamiza, kukonza, kuteteza zingwe kumadzi ndi fumbi. Amagwiritsidwa ntchito kwambiri kumadera monga matabwa owongolera, zida, magetsi, zida zamakina, masitima apamtunda, ma mota, ma projekiti etc.Titha kukupatsirani zingwe zazitsulo zopangidwa ndi nickel-plated brass (Order No.: HSM), chitsulo chosapanga dzimbiri (Order No.: HSMS) ndi aluminiyamu (Order No.: HSMAL).
| Zofunika: | Thupi: nickel-plated brass; chisindikizo: polyamide; kusindikiza: mphira wosinthidwa |
| Kutentha: | Mphindi -40℃,Max 100℃,Pafupifupi mphindi 120℃ |
| Digiri ya Chitetezo: | IP68(IEC60529) yokhala ndi mphete ya O yoyenera mkati mwa milingo yokhazikika |
| Katundu: | Kukaniza kugwedezeka ndi kukhudzidwa, malinga ndi IEC-60077-1999. |
| Mapulogalamu: | Kumanga makina, zida zamagetsi, kabati yowongolera magetsi |
| Zitsimikizo: | CE, RoHS, UL |
Kufotokozera
(Chonde titumizireni kuti mudziwe zambiri ngati mukufuna masaizi ena osaphatikizidwa pamndandanda wotsatira.)
| Chingwe cha nickel-plated brass (Metric thread) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Nkhani No. | Ulusi | Clamping range | AG | GL | H | Kukula kwa wrench | Paketi |
|
| Dimension | mm | mm | mm | mm | mm | mayunitsi |
| Chithunzi cha HSM-M8 | M8x1.0 | 3 ~5 | 8 | 6 | 19 | 14/14 | 50 |
| Chithunzi cha HSM-M10 | M10x1.0 | 3-6.5 | 10 | 6 | 19 | 14/14 | 50 |
| Chithunzi cha HSM-M12 | M12 × 1.5 | 3-6.5 | 12 | 6 | 19 | 14/14 | 75 |
| HSM-M16-H | M16 × 1.5 | 3-6.5 | 16 | 7 | 20 | 14/18 | 75 |
| Chithunzi cha HSM-M16 | M16 × 1.5 | 4~8 pa | 16 | 7 | 21 | 17/18 | 75 |
| HSM-M16-D | M16 × 1.5 | 5-10 | 16 | 7 | 22.5 | 20/20 | 50 |
| Chithunzi cha HSM-M18 | M18 × 1.5 | 5-10 | 18 | 7 | 22.5 | 20/20 | 50 |
| HSM-M20-H | M20 × 1.5 | 5-10 | 20 | 7 | 22.5 | 20/22 | 32 |
| Chithunzi cha HSM-M20 | M20 × 1.5 | 6-12 | 20 | 7 | 23.5 | 22/22 | 32 |
| HSM-M20-D | M20 × 1.5 | 8-14 | 20 | 7 | 23 | 24/24 | 32 |
| Chithunzi cha HSM-M22 | M22 × 1.5 | 8-14 | 22 | 7 | 23 | 24/24 | 32 |
| HSM-M24-H | M24 × 1.5 | 6-12 | 24 | 7 | 23.5 | 24/27 | 32 |
| Chithunzi cha HSM-M24 | M24 × 1.5 | 8-14 | 24 | 7 | 23 | 24/27 | 18 |
| HSM-M25-H | M25 × 1.5 | 8-14 | 25 | 7 | 23 | 24/28 | 18 |
| Chithunzi cha HSM-M25 | M25 × 1.5 | 10-16 | 25 | 7 | 24.5 | 28/28 | 18 |
| HSM-M25-D | M25 × 1.5 | 13-18 | 25 | 7 | 26 | 30/30 | 18 |
| HSM-M27-H | M27 × 2.0 | 10-16 | 27 | 8 | 24.5 | 28/30 | 18 |
| Chithunzi cha HSM-M27 | M27 × 2.0 | 13-18 | 27 | 8 | 26 | 30/30 | 18 |
| HSM-M30-H | M30 × 2.0 | 10-16 | 30 | 8 | 24.5 | 28/34 | 18 |
| Chithunzi cha HSM-M30 | M30 × 2.0 | 13-18 | 30 | 8 | 26 | 30/34 | 18 |
| HSM-M32-H | M32 × 1.5 | 13-18 | 32 | 8 | 26 | 30/36 | 18 |
| Chithunzi cha HSM-M32 | M32 × 1.5 | 15-22 | 32 | 8 | 28 | 36/36 | 18 |
| Chithunzi cha HSM-M32-D | M32 × 1.5 | 18-25 | 32 | 8 | 33 | 40/38 | 8 |
| Chithunzi cha HSM-M33 | M33 × 2.0 | 18-25 | 33 | 8 | 33 | 40/38 | 8 |
| HSM-M36-H | M36 × 2.0 | 15-22 | 36 | 8 | 28 | 36/40 | 8 |
| Chithunzi cha HSM-M36 | M36 × 2.0 | 18-25 | 36 | 8 | 33 | 40/40 | 8 |
| HSM-M40-H | M40 × 1.5 | 18-25 | 40 | 9 | 33.5 | 40/45 | 8 |
| Chithunzi cha HSM-M40 | M40 × 1.5 | 22-30 | 40 | 9 | 35.5 | 45/45 | 8 |
| HSM-M40-D | M40 × 1.5 | 22-32 | 40 | 9 | 38.5 | 50/50 | 4 |
| Chithunzi cha HSM-M42 | M42 × 2.0 | 22-32 | 42 | 9 | 38.5 | 50/50 | 4 |
| Chithunzi cha HSM-M48 | M48×2.0 | 22-32 | 48 | 9 | 38.5 | 50/52 | 4 |
| HSM-M50 | M50 × 1.5 | 30-38 | 50 | 9 | 40 | 58/55 | 4 |
| Chithunzi cha HSM-M56 | M56 × 2.0 | 30-38 | 56 | 9 | 40 | 58/60 | 4 |
| Chithunzi cha HSM-M60 | M60 × 2.0 | 37-44 | 60 | 10 | 41 | 65/65 | 2 |
| Chithunzi cha HSM-M63 | M63 × 1.5 | 37-44 | 63 | 10 | 41 | 65/70 | 2 |
| Chithunzi cha HSM-M63-D | M63 × 1.5 | 42-53 | 63 | 10 | 44.5 | 75/75 | 2 |
| Chithunzi cha HSM-M64 | M64 × 2.0 | 37-44 | 64 | 10 | 41 | 65/70 | 2 |
|
|
|
| |||||
| Chingwe cha nickel-plated brass (Metric thread - Jumbo size) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Nkhani No. | Ulusi | Clamping range | AG | GL | SW1/SW2 | Mtengo wa H | Paketi |
|
| Dimension | mm | mm | mm |
|
| mayunitsi |
| HSM-M72-H | M72X2.0 | 52-57 | 72 | 12 | 80/80 | 43 | 2 |
| HSM-M75-H | M75X2.0 | 52-57 | 75 | 12 | 80/80 | 43 | 2 |
| HSM-M80-H | M80X2.0 | 52-57 | 80 | 12 | 80/86 | 43 | 2 |
| Chithunzi cha HSM-M72 | M72X2.0 | 55-61 | 72 | 12 | 86/86 | 43 | 2 |
| Chithunzi cha HSM-M75 | M75X2.0 | 55-61 | 75 | 12 | 86/86 | 43 | 2 |
| Chithunzi cha HSM-M80 | M80X2.0 | 55-61 | 80 | 12 | 86/86 | 43 | 2 |
| HSM-M80-D | M80X2.0 | 60-66 | 80 | 12 | 90/90 | 43 | 2 |
| Chingwe cha Nickel-plated brass (Metric thread: ulusi wautali) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Nkhani No. | Ulusi | Clamping range | AG | GL | H | Kukula kwa wrench | Paketi |
|
| Dimension | mm | mm | mm | mm | mm | mayunitsi |
| HSM-M12-L | M12 × 1.5 | 3-6.5 | 12 | 10 | 19 | 14/14 | 50 |
| Chithunzi cha HSM-M16-HL | M16 × 1.5 | 3-6.5 | 16 | 10 | 20 | 14/18 | 50 |
| HSM-M16-L | M16 × 1.5 | 4~8 pa | 16 | 10 | 21 | 17/18 | 50 |
| Chithunzi cha HSM-M16-DL | M16 × 1.5 | 5-10 | 16 | 10 | 22.5 | 20/20 | 50 |
| HSM-M18-L | M18 × 1.5 | 5-10 | 18 | 10 | 22.5 | 20/20 | 50 |
| Zithunzi za HSM-M20-HL | M20 × 1.5 | 5-10 | 20 | 10 | 22.5 | 20/22 | 32 |
| HSM-M20-L | M20 × 1.5 | 6-12 | 20 | 10 | 23.5 | 22/22 | 32 |
| Chithunzi cha HSM-M20-DL | M20 × 1.5 | 8-14 | 20 | 10 | 23 | 24/24 | 32 |
| HSM-M22-L | M22 × 1.5 | 8-14 | 22 | 10 | 23 | 24/24 | 32 |
| Zithunzi za HSM-M24-HL | M24 × 1.5 | 6-12 | 24 | 12 | 23.5 | 24/27 | 32 |
| HSM-M24-L | M24 × 1.5 | 8-14 | 24 | 12 | 23 | 24/27 | 18 |
| Zithunzi za HSM-M25-HL | M25 × 1.5 | 8-14 | 25 | 12 | 23 | 24/28 | 18 |
| HSM-M25-L | M25 × 1.5 | 10-16 | 25 | 12 | 24.5 | 28/28 | 18 |
| HSM-M25-DL | M25 × 1.5 | 13-18 | 25 | 12 | 26 | 30/30 | 18 |
| Zithunzi za HSM-M27-HL | M27 × 2.0 | 10-16 | 27 | 12 | 24.5 | 28/30 | 18 |
| HSM-M27-L | M27 × 2.0 | 13-18 | 27 | 12 | 26 | 30/30 | 18 |
| Chithunzi cha HSM-M30-HL | M30 × 2.0 | 10-16 | 30 | 12 | 24.5 | 28/34 | 18 |
| HSM-M30-L | M30 × 2.0 | 13-18 | 30 | 12 | 26 | 30/34 | 18 |
| Chithunzi cha HSM-M32-HL | M32 × 1.5 | 13-18 | 32 | 12 | 26 | 30/36 | 18 |
| HSM-M32-L | M32 × 1.5 | 15-22 | 32 | 12 | 28 | 36/36 | 18 |
| Chithunzi cha HSM-M32-DL | M32 × 1.5 | 18-25 | 32 | 12 | 33 | 40/38 | 8 |
| HSM-M33-L | M33 × 2.0 | 18-25 | 33 | 12 | 33 | 40/38 | 8 |
| Chithunzi cha HSM-M36-HL | M36 × 2.0 | 15-22 | 36 | 12 | 28 | 36/40 | 8 |
| HSM-M36-L | M36 × 2.0 | 18-25 | 36 | 12 | 33 | 40/40 | 8 |
| Zithunzi za HSM-M40-HL | M40 × 1.5 | 18-25 | 40 | 15 | 33 | 40/45 | 4 |
| HSM-M40-L | M40 × 1.5 | 22-30 | 40 | 15 | 35.5 | 45/45 | 4 |
| Chithunzi cha HSM-M40-DL | M40 × 1.5 | 22-32 | 40 | 15 | 38.5 | 50/50 | 4 |
| HSM-M42-L | M42 × 2.0 | 22-32 | 42 | 15 | 38.5 | 50/50 | 4 |
| HSM-M48-L | M48×2.0 | 22-32 | 48 | 15 | 38.5 | 50/52 | 4 |
| HSM-M50-L | M50 × 1.5 | 30-38 | 50 | 15 | 40 | 58/55 | 2 |
| HSM-M56-L | M56 × 2.0 | 30-38 | 56 | 15 | 40 | 58/60 | 4 |
| HSM-M60-L | M60 × 2.0 | 37-44 | 60 | 15 | 41 | 65/65 | 2 |
| HSM-M63-L | M63 × 1.5 | 37-44 | 63 | 15 | 41 | 65/70 | 2 |
| Chithunzi cha HSM-M63-DL | M63 × 1.5 | 42-53 | 63 | 15 | 44.5 | 75/75 | 1 |
| HSM-M64-L | M64 × 2.0 | 37-44 | 64 | 15 | 41 | 65/70 | 2 |
| Chingwe cha Nickel-Plated Brass (PG ulusi) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Nkhani No. | Ulusi | Clamping range | AG | GL | H | Kukula kwa wrench | Paketi |
|
| Dimension | mm | mm | mm | mm | mm | mayunitsi |
| Chithunzi cha HSM-P07 | PG7 | 3-6.5 | 12.5 | 6 | 19 | 14/14 | 75 |
| HSM-P09-H | PG9 | 3-6.5 | 15.2 | 7 | 20 | 14/17 | 75 |
| Chithunzi cha HSM-P09 | PG9 | 4~8 pa | 15.2 | 7 | 21 | 17/17 | 75 |
| Chithunzi cha HSM-P11 | PG11 | 5-10 | 18.6 | 7 | 22.5 | 20/20 | 32 |
| HSM-P13.5-H | PG13.5 | 5-10 | 20.4 | 7 | 22.5 | 20/22 | 32 |
| HSM-P13.5 | PG13.5 | 6-12 | 20.4 | 7 | 23.5 | 22/22 | 32 |
| HSM-P16-H | PG16 | 6-12 | 22.5 | 7 | 23.5 | 22/24 | 32 |
| Chithunzi cha HSM-P16 | PG16 | 8-14 | 22.5 | 7 | 23 | 24/24 | 32 |
| HSM-P21-H | PG21 | 10-16 | 28.3 | 7 | 24.5 | 28/30 | 18 |
| Zithunzi za HSM-P21 | PG21 | 13-18 | 28.3 | 7 | 26 | 30/30 | 18 |
| HSM-P29-H | PG29 | 15-22 | 37 | 8 | 28 | 36/40 | 8 |
| Zithunzi za HSM-P29 | PG29 | 18-25 | 37 | 8 | 33 | 40/40 | 8 |
| Zithunzi za HSM-P36 | PG36 | 22-32 | 47 | 9 | 38.5 | 50/50 | 4 |
| Zithunzi za HSM-P42 | PG42 | 30-38 | 54 | 9 | 40 | 58/58 | 2 |
| Chithunzi cha HSM-P48 | PG48 | 37-44 | 59.3 | 10 | 41 | 65/65 | 2 |
| Chingwe cha Nickel-plated brass (ulusi wa PG: ulusi wautali) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Nkhani No. | Ulusi | Clamping range | AG | GL | H | Kukula kwa wrench | Paketi |
|
| Dimension | mm | mm | mm | mm | mm | mayunitsi |
| HSM-P07-L | PG7 | 3-6.5 | 12.5 | 10 | 19 | 14/14 | 50 |
| Zithunzi za HSM-P09-HL | PG9 | 3-6.5 | 15.2 | 10 | 20 | 14/17 | 50 |
| HSM-P09-L | PG9 | 4~8 pa | 15.2 | 10 | 21 | 17/17 | 50 |
| HSM-P11-L | PG11 | 5-10 | 18.6 | 10 | 22.5 | 20/20 | 50 |
| HSM-P13.5-HL | PG13.5 | 5-10 | 20.4 | 10 | 22.5 | 20/22 | 32 |
| HSM-P13.5-L | PG13.5 | 6-12 | 20.4 | 10 | 23.5 | 22/22 | 32 |
| Zithunzi za HSM-P16-HL | PG16 | 6-12 | 22.5 | 10 | 23.5 | 22/24 | 32 |
| HSM-P16-L | PG16 | 8-14 | 22.5 | 10 | 23 | 24/24 | 32 |
| Zithunzi za HSM-P21-HL | PG21 | 10-16 | 28.3 | 12 | 24.5 | 28/30 | 18 |
| HSM-P21-L | PG21 | 13-18 | 28.3 | 12 | 26 | 30/30 | 18 |
| Zithunzi za HSM-P29-HL | PG29 | 15-22 | 37 | 12 | 28 | 36/40 | 8 |
| HSM-P29-L | PG29 | 18-25 | 37 | 12 | 33 | 40/40 | 8 |
| HSM-P36-L | PG36 | 22-32 | 47 | 15 | 38.5 | 50/50 | 4 |
| HSM-P42-L | PG42 | 30-38 | 54 | 15 | 40 | 58/58 | 2 |
| HSM-P48-L | PG48 | 37-44 | 59.3 | 15 | 41 | 65/65 | 2 |
| Chingwe cha Nickel-plated brass (G ulusi) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Nkhani No. | Ulusi | Clamping range | AG | GL | H | Kukula kwa wrench | Paketi |
|
| Dimension | mm | mm | mm | mm | mm | mayunitsi |
| HSM-G3/8 | G3/8″ | 4~8 pa | 16.66 | 8 | 21 | 17/20 | 32 |
| HSM-G1/2-H | G1/2″ | 5-10 | 20.99 | 8 | 22.5 | 20/24 | 32 |
| HSM-G1/2 | G1/2″ | 6-12 | 20.99 | 8 | 23.5 | 22/24 | 32 |
| HSM-G1/2-D | G1/2″ | 8-14 | 20.99 | 8 | 23.5 | 24/24 | 32 |
| HSM-G3/4-TH | G3/4″ | 6-12 | 26.44 | 8 | 23.5 | 22/30 | 18 |
| HSM-G3/4-H | G3/4″ | 8-14 | 26.44 | 8 | 23 | 24/30 | 18 |
| HSM-G3/4 | G3/4″ | 13-18 | 26.44 | 8 | 26 | 30/30 | 18 |
| HSM-G1 | G1″ | 18-25 | 33.24 | 9 | 33 | 40/40 | 8 |
| HSM-G1 1/4 | G1 1/4″ | 22-32 | 41.91 | 10 | 38.5 | 50/50 | 4 |
| HSM-G1 1/2 | G1 1/2″ | 30-38 | 47.8 | 10 | 40 | 58/55 | 2 |
| HSM-G2 | G2″ | 37-44 | 59.61 | 11 | 41 | 65/65 | 2 |
| Chingwe cha Nickel-plated brass (ulusi wa NPT) |
|
| |||||
|
|
|
|
|
|
|
|
|
| Nkhani No. | Ulusi | Clamping range | AG | GL | H | Kukula kwa wrench | Paketi |
|
| Dimension | mm | mm | mm | mm | mm | mayunitsi |
| HSM-N3/8 | NPT3/8″ | 4~8 pa | 17.05 | 11 | 21 | 17/20 | 50 |
| HSM-N1/2-H | NPT1/2″ | 5-10 | 20.85 | 13 | 23.5 | 20/23 | 32 |
| HSM-N1/2 | NPT1/2″ | 6-12 | 20.85 | 13 | 23.5 | 22/23 | 32 |
| HSM-N1/2-D | NPT1/2″ | 8-14 | 20.85 | 13 | 23.5 | 24/24 | 32 |
| HSM-N3/4-TH | NPT3/4″ | 6-12 | 26.3 | 13 | 23.5 | 22/30 | 18 |
| HSM-N3/4-H | NPT3/4″ | 8-14 | 26.3 | 13 | 23 | 24/30 | 18 |
| HSM-N3/4 | NPT3/4″ | 13-18 | 26.3 | 13 | 26 | 30/30 | 18 |
| Chithunzi cha HSM-N1 | NPT1″ | 18-25 | 33.15 | 16 | 33 | 40/40 | 8 |
| HSM-N1 1/4 | NPT1 1/4″ | 22-32 | 41.85 | 16 | 38.5 | 50/50 | 4 |
| HSM-N1 1/2 | NPT1 1/2″ | 30-38 | 47.75 | 18 | 40 | 58/55 | 2 |
| Chithunzi cha HSM-N2 | NPT2″ | 37-44 | 59.55 | 18 | 41 | 65/65 | 1 |
